Let’s face it! Working with plastic is no fun, especially if you have to make constant holes. And the nuisance increases when you don’t even have a drill. So, how to drill a hole in plastic without a drill?
But, before that, tell me, do you know why is it essential to drill holes in your plastic? Are you aware of the reason? If not, you will know it now! You can make holes in the plastic for various purposes, and the most common is to frame them and attach materials to them.
So, now you know why? Now, let’s see how?
How to Drill a Hole in Plastic Without a Drill?
Well, drilling holes in plastic even with a drill isn’t very easy, and it takes a good amount of skills and expertise to do this perfectly. Plus, not everyone has a drill. So, it isn’t amusing that people often ask how to drill a hole in plastic without a drill. But, if you also have the same question, then we have good news for you!
Yes, it is possible and relatively easy to carve holes in the plastic by using tools other than a drill. But, you need a few ubiquitous tools and 99℅ of the time present in your home. So, don’t worry about it and focus on the things you want to set up.
You will be having a hard time doing your DIY projects if you don’t have a drill and have no idea how to make cuts or holes on your plastic without it. Plus, even if you have one, it may need repairing and stop working suddenly. So, better be prepared for the worse. Learning how to use other tools to make holes will only benefit you in the long run.
5 Ways To Drill A Hole In Plastic, Other Than By Using A Drill
Now, you know that you can drill holes in your plastic without a drill. But, the question remains: how to make a hole in plastic without a drill?
– This is a popular tool for handling different needs related to plastic. The best thing is it takes minimum effort to drill holes by using this. So, why not use it?
Use a C-clamp to hold the plastic and then do the markings after the cut circularly or linearly as the situation demands. Repeat the step, and you will be done after a few minutes.
– This is a pretty good option too. But the only concern while using this tool is that it can heat the plastic to extremely high degrees. This can be dangerous as the melted plastic can cause burns. So, take utmost care while working with a soldering iron. Try working in a well-ventilated area to avoid any accidents. Use a load to keep the plastic still. Then, very carefully turn on the iron and start making the cuts with it by moving it in a clockwise or anti-clockwise manner.
Using a laser is the newest and easiest way to drill a hole in your plastic. You need to hold it and push it into the plastic, and the laser will do the rest of the work itself.
– This is also an excellent tool to help you drill holes in your plastic without worrying about a drill.
A water jet can be a good option too. You can use the pressure from your water jet to drill a hose and keep it at a straight angle to make your work easier.
How to drill a hole in plastic without a drill? Well, it’s fair enough to ask this question as not everyone has a drill in their home. So, knowing your options is a good decision. Don’t let any tool come in the middle of your work.
There are a lot of options available to do this. Few of them are hacksaws, soldering irons, lasers, rearers, and water jets. Instead, you can use any of them to carve a hole in your plastic.
How to drill hard plastic?
Well, drilling through hard plastic is a bit tough. But, this doesn’t mean that it isn’t possible. You certainly should at least try. You need to use a specific type of drill bits to do this, preferably spur-point bits. By using these, you can drill your plastic quickly.
Can you screw into plastic?
Yes, but you need to know the technique and follow it properly. You can use machine screws into plastic, but before that, you need to make some amends. Before you start, make sure to mark the area which needs to be screwed. Then, drill a hole in this part by using a drill or a hacksaw. Alternatively, you can also use a soldering iron or a jet. But, remember to make the hole precisely of the same size as the object.
After you are done with the drilling part, you can slide the screw in and fasten it.